Salt Lake County · Free quotes
Epoxy Flooring in Taylorsville, UT
Solid and flake epoxy floors for Taylorsville garages and shops, over properly ground concrete. Get a free quote.
SLC Epoxy Flooring · Taylorsville and Salt Lake County
Taylorsville Epoxy Floor Quote
Add the garage or shop size, the slab's age if you know it, and any cracks, stains or old coatings. Expect a callback about the floor and a time to see it.
- Free floor quotes
- Diamond-ground prep
- Moisture tested
- Solid or flake systems
Car count or rough square footage is plenty.
Taylorsville, Utah
Epoxy flooring in Taylorsville
Some Taylorsville garage floors are ready to coat after grinding and crack repair, while others need resurfacing or a new slab first. We'll tell you which, and why, then quote the floor your garage actually needs rather than the one that is simplest to sell.
Detached shops around the valley often sit on large slabs with long saw-cut joints, and those joints should be checked for movement before they're coated over. Concrete outside the garage, from the apron to the front walk, does best with a penetrating sealer renewed every few years wherever de-icing salt gets used.
Free epoxy quotes in Taylorsville start with three details: floor size, roughly how old the slab is, and whatever coating or sealer is on it now. A return call follows, and so does a visit to look at the concrete.
Coatings and concrete
Floors in Taylorsville
Epoxy Garage Floors
Taylorsville: solid-color epoxy garage floors over fully ground, repaired slabs.
More on epoxy garage floors
Flake Epoxy Floors
Full and partial broadcast flake epoxy floors in Taylorsville.
More on flake epoxy floors
Shop & Workshop Floors
Heavy-build epoxy floors for shops and work bays in Taylorsville.
More on shop & workshop floors
New Garage Floor Slabs
We handle new concrete garage floor slabs poured ready for coating in Taylorsville.
More on new garage floor slabs
Concrete Resurfacing
Polymer overlays for scaled garage floors, walks and patios in Taylorsville.
More on concrete resurfacing
Concrete Sealing
We handle penetrating and topical concrete sealing for aprons, garages, walks and patios in Taylorsville.
More on concrete sealing
Salt Lake County, Utah
Around Taylorsville
In garages near Royal Meadows, Bennion Cove and Valley Fair Mall and everywhere else in Taylorsville, the slab underneath matters more than the color on top. Every quote here starts with moisture, cracks and whatever is already on the floor.
Plenty of older garages in the Salt Lake Valley were poured with no vapor barrier underneath, so moisture rising from damp lake-bed clay is worth testing before a coating goes down.
Close to Taylorsville, garage and shop floors in Kearns, Murray, West Valley City and Midvale get the same grind, repair and coat sequence, quoted free.
Examples
Ground, coated and flaked garage floors
Stock photos: examples of the work type.
Questions
Taylorsville FAQs
Can a garage in Taylorsville be coated in winter?
Yes, if the garage can be heated so the slab stays warm enough for the coating to cure. Unheated garages are usually scheduled from spring through fall. Slab temperature, not just air temperature, is checked before coating.
Do I need a permit for an epoxy floor in Taylorsville?
Coating an existing floor usually doesn't call for one. Pouring a new garage slab can, depending on the city and the scope, and digging outside starts with an 811 call. HOA rules rarely touch interior floors but can apply to visible exterior work.
How long will a Taylorsville garage be out of use?
Usually a few days in total. Prep and coating take one to a few days depending on the system and repairs, then foot traffic comes back first and cars follow a few days later, depending on the coating and the temperature.
Will an old, stained Taylorsville garage floor work for epoxy?
Usually, if it's structurally sound. Grinding removes most stains and old coatings, deep oil is treated, and cracks are repaired. Floors that have sunk or broken apart are better replaced first.
How do I get an epoxy floor quote in Taylorsville?
Dial (801) 658-9502 or fill in the form with the floor size and its condition. A callback follows to go over coating options and pick a time to test and measure the slab, and there's no charge for the quote.
What does an epoxy garage floor cost?
Square footage, the slab's condition and the system you pick set the price. Prep is the variable people underestimate: a clean, sound slab grinds quickly, while one with old sealer, oil soak, wide cracks or spalling takes more grinding and repair. Flake coverage and topcoat thickness matter too, and the quote is free once we've seen the floor.
Get a Free Quote in Taylorsville
Send the garage size and what's on the floor now, and a free quote follows with the prep explained.